Difference between revisions of "Creating a simple base"

From OrbiterWiki
Jump to navigation Jump to search
(Added content.)
 
(21 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[http://alpe-fountains.com/images/cwkgtp.html Federconsumatori it] [http://jtcmed.com/zaya/tvfkaj.html Cavatappo trentino] [http://artfountains.eu/images/icons/soopgm.html Custodia per fotocamera sony] [http://suncom.uz/picture_library/bfefsx.html Ciste ovarica dolore lombare] [http://jtcmed.com/zaya/otwfux.html Arredamento giapponese] [http://suncom.uz/picture_library/bibjgg.html Associazione italiana consumatore internet] [http://bigeyelive.com/images/icons/bmvopx.html Il giornale] [http://jtcmed.com/zaya/mpofrv.html Unire file mp3] [http://jesper-holm.dk/GeneratedItems/gddkbi.html Jessica jaymes] [http://uzmilana.com/pages/htmls/rmmtsr.html Viaggio seychelles] [http://bigeyelive.com/images/icons/mthbbj.html Significato sogno coniglio bianco marmotta] [http://jtcmed.com/zaya/ekrsbl.html Parafrasi] [http://alpe-fountains.com/images/edgngt.html Zaino eastpack] [http://alpe-fountains.com/images/jbencf.html Hotel alba adriatica] [http://artfountains.eu/images/icons/kbweta.html Videoconferenza] [http://alpe-fountains.com/images/prbjjq.html Video masturbazioni maschili] [http://jtcmed.com/zaya/ncbfbn.html Statura] [http://artfontany.cz/images/icons/vwukwb.html Diari di viaggio] [http://jtcmed.com/zaya/jslhei.html Cazzi esagerati] [http://uzmilana.com/pages/htmls/mkigld.html Racconti collant] [http://infocz.wz.cz/niremp.html Gnv crociera] [http://jesper-holm.dk/GeneratedItems/oaudel.html Lavasoft] [http://alpe-fountains.com/images/vwhmqc.html Orchidea de santis] [http://alpe-fountains.com/images/bwhgmh.html Hotel caravaggio firenze] [http://jtcmed.com/zaya/sjiobt.html Belle donna] [http://alpe-fountains.com/images/dgbgat.html Guadagnare] [http://jtcmed.com/zaya/jlxerc.html Donne scopate donna] [http://jesper-holm.dk/GeneratedItems/sggsjv.html Barbanera it] [http://jesper-holm.dk/GeneratedItems/eatcjv.html Preventivo assicurazione autocarro online] [http://artfountains.eu/images/icons/kuwlqs.html Msn notizia ansa] [http://bigeyelive.com/images/icons/rtsqpq.html Video sexi gratis] [http://marketingstat.com/iq/gsiwtm.html Indice rivalutazione tfr] [http://bigeyelive.com/images/icons/mksnih.html Duplicazione masterizzazione cd dvd] [http://alpe-fountains.com/images/fulvfu.html Penelope cruz] [http://bigeyelive.com/images/icons/mjfhau.html Hotel conegliano] [http://artfontany.cz/images/icons/hijvrp.html Tatuaggi fiori] [http://artfontany.cz/images/icons/bganfb.html Foto roma satellite] [http://infocz.wz.cz/kvmust.html Dawson s creek] [http://jtcmed.com/zaya/bqdrrv.html Paolo fox] [http://jtcmed.com/zaya/vogefp.html Porno spiate] [http://bigeyelive.com/images/icons/tnawuv.html Cuscino lattice] [http://jesper-holm.dk/GeneratedItems/cdcakb.html Sessolibero] [http://suncom.uz/picture_library/obxpck.html Albergo 3 stella colonia] [http://suncom.uz/picture_library/poxccg.html Coffee maker] [http://marketingstat.com/iq/gmvgea.html Bow wow] [http://infocz.wz.cz/coebph.html Quadri di klimt veneto] [http://suncom.uz/picture_library/lqrufs.html Club single roma] [http://uzmilana.com/pages/htmls/feawne.html Porno con cani] [http://jtcmed.com/zaya/wsvdsv.html Wham best] [http://bigeyelive.com/images/icons/kbwsdf.html Cuscino anatomico] [http://alpe-fountains.com/images/oowchp.html Danno ashe porno] [http://bigeyelive.com/images/icons/ofqkwx.html Scarpa gucci] [http://uzmilana.com/pages/htmls/pdnrgk.html Dream theater] [http://alpe-fountains.com/images/wvluof.html Video manga gratis] [http://artfountains.eu/images/icons/neocpt.html Suicide girls] [http://infocz.wz.cz/chkccm.html Passeggino gemellare] [http://artfontany.cz/images/icons/xupvxt.html Video porno gratis zippati] [http://alpe-fountains.com/images/ajspav.html Porno gratis con animali] [http://bigeyelive.com/images/icons/hntnkn.html Ufficio stampa] [http://jtcmed.com/zaya/dgxqcq.html Download free aquarium screensaver] [http://artfontany.cz/images/icons/scbiik.html Isole cook] [http://infocz.wz.cz/tkpjvv.html Sicurezza lavoro] [http://artfountains.eu/images/icons/cjffhs.html Girl for matura] [http://jesper-holm.dk/GeneratedItems/tuwujt.html Crimine] [http://artfountains.eu/images/icons/jduthf.html Porpora trombocitopenica] [http://marketingstat.com/iq/jfrkvt.html Linear assicurazione] [http://alpe-fountains.com/images/sgrqps.html Carrello tenda usato napoli] [http://artfountains.eu/images/icons/qucbkm.html Hp photosmart m23] [http://jesper-holm.dk/GeneratedItems/opqehx.html Cerca racconti di incesti] [http://suncom.uz/picture_library/diblpn.html Vendita tensostruttura allestimento fiera] [http://suncom.uz/picture_library/rrimka.html Porno donne e cavalli] [http://uzmilana.com/pages/htmls/vrtdis.html Hotel monaco baviera] [http://marketingstat.com/iq/lsgkud.html Val gardena] [http://artfountains.eu/images/icons/clnfvl.html Voli da rimini per tirana] [http://jesper-holm.dk/GeneratedItems/smvpba.html Hotel tre struzzo praga] [http://suncom.uz/picture_library/bjmlbo.html Cacca] [http://alpe-fountains.com/images/vhesul.html Anzwers chat] [http://uzmilana.com/pages/htmls/gjqrlw.html Amicizia incontro anima gemella] [http://suncom.uz/picture_library/pvaeil.html Gioco online flashgames it] [http://suncom.uz/picture_library/tbadxv.html Ceiling fans] [http://jtcmed.com/zaya/uttlrr.html Topless beach] [http://jesper-holm.dk/GeneratedItems/gvnfji.html Francesco guccini] [http://bigeyelive.com/images/icons/ndbxar.html Roma ristorante giapponese hasekura] [http://jtcmed.com/zaya/uaqjik.html Ragazze esibizioniste] [http://jesper-holm.dk/GeneratedItems/cdakkd.html Manga hentay gratis] [http://jtcmed.com/zaya/uhbwpa.html Albergo lugano] [http://jesper-holm.dk/GeneratedItems/kijnjm.html Figc piemonte] [http://jesper-holm.dk/GeneratedItems/gqdnwd.html Test intelligenza gratis] [http://alpe-fountains.com/images/gbnwkv.html Cazzoni gay] [http://alpe-fountains.com/images/fxbakt.html Cerco lavoro san severo] [http://uzmilana.com/pages/htmls/xtxjfv.html Gayromeo com] [http://alpe-fountains.com/images/sjexli.html Ufficio rappresentanza] [http://jesper-holm.dk/GeneratedItems/kscgqc.html Impastatrice pane] [http://alpe-fountains.com/images/xjorei.html Questura di roma] [http://artfontany.cz/images/icons/fggiwl.html Albergo timisoara] [http://jtcmed.com/zaya/ogrtjf.html Troie che scopano con animali] [http://suncom.uz/picture_library/mfvkuw.html Bellisinasce it] [http://infocz.wz.cz/svmauw.html Ultima calcio mercato] [http://jtcmed.com/zaya/lwpiic.html Pokemon xxx immagini] [http://artfountains.eu/images/icons/ufgaqj.html Winx enchantix da colorare] [http://alpe-fountains.com/images/wuqjnb.html Padova albergo] [http://artfountains.eu/images/icons/ssrkop.html Greeting card publisher] [http://alpe-fountains.com/images/gmiavg.html Carrello trasporto tv] [http://artfountains.eu/images/icons/elmthg.html Contatti msn di ragazze] [http://artfountains.eu/images/icons/usqfjq.html Manchester cose fare] [http://marketingstat.com/iq/jpchfg.html Vacanza in bici] [http://alpe-fountains.com/images/kgcqwd.html Palermo albergo] [http://bigeyelive.com/images/icons/svtdxn.html Pensione mandorla ischia] [http://jtcmed.com/zaya/juuoar.html Espace renault] [http://artfontany.cz/images/icons/nnwbuh.html Versioni seneca] [http://jesper-holm.dk/GeneratedItems/oolnbj.html Los roques posada] [http://jtcmed.com/zaya/hbllmp.html Prezzo foto camera samsung] [http://uzmilana.com/pages/htmls/oqlkwr.html Sound blaster audio pci] [http://uzmilana.com/pages/htmls/osfikf.html Agriturismo acquario genova] [http://jtcmed.com/zaya/khmmdc.html Footlocker] [http://jesper-holm.dk/GeneratedItems/cajupx.html Fitness esercizio snellire gambe] [http://artfontany.cz/images/icons/wefiow.html Ragazze porca] [http://jtcmed.com/zaya/gnqlnc.html Chiappe] [http://suncom.uz/picture_library/shdhvg.html Motore ricerca file torrent] [http://marketingstat.com/iq/weccdo.html Somatoline cosmetics] [http://jtcmed.com/zaya/ihvadx.html Pinguino] [http://infocz.wz.cz/vlnfpo.html Hotel 3 stelle dublino] [http://artfountains.eu/images/icons/tgcjrx.html Creditcards] [http://jtcmed.com/zaya/aicrbw.html Scarlett johansson] [http://alpe-fountains.com/images/qiarnu.html Ls magazine child] [http://artfontany.cz/images/icons/gwaihj.html Fumetti xxx] [http://jesper-holm.dk/GeneratedItems/vvxrbk.html Grand canyon cose fare] [http://artfontany.cz/images/icons/hcdwjg.html Eutelia] [http://suncom.uz/picture_library/qwhmvg.html Ass licking cum] [http://artfontany.cz/images/icons/gwdfwm.html Hotel legnano] [http://artfountains.eu/images/icons/bpplii.html Interacial] [http://jesper-holm.dk/GeneratedItems/rmdjfn.html Bambine troie] [http://artfontany.cz/images/icons/uebghq.html Musica gratis] [http://suncom.uz/picture_library/tvhosq.html Scopate bestiali] [http://jesper-holm.dk/GeneratedItems/sneemf.html Case famiglia in campania] [http://alpe-fountains.com/images/aqowlc.html Liquori] [http://suncom.uz/picture_library/gewwbo.html Hotel san benedetto tronto] [http://infocz.wz.cz/fotcsb.html Porno vecchia] [http://jtcmed.com/zaya/jvxxdq.html Sesso negri] [http://uzmilana.com/pages/htmls/ucvolm.html Camera commercio roma] [http://alpe-fountains.com/images/tnddfb.html Cartoni da colorare] [http://alpe-fountains.com/images/swmgur.html Sala convegno affitto milano] [http://infocz.wz.cz/ldsmcx.html Alchimia] [http://infocz.wz.cz/evtmhi.html Trish stratus nuda] [http://jtcmed.com/zaya/fvblaw.html Tesi ringraziamento] [http://suncom.uz/picture_library/wwvlsb.html Foto maschi giovani nudi] [http://uzmilana.com/pages/htmls/iivmrr.html Calligaris piscina] [http://alpe-fountains.com/images/bswcva.html Feet shoe worship fetish mpg] [http://alpe-fountains.com/images/kkrcqq.html Wendy plan weight watchers] [http://alpe-fountains.com/images/pokimc.html Horse fuck] [http://infocz.wz.cz/ksmdlr.html Winx enchantix immagini] [http://artfontany.cz/images/icons/ggeuog.html Rosarossa com] [http://alpe-fountains.com/images/brucag.html Clipart battesimo gratis] [http://jesper-holm.dk/GeneratedItems/ptvdva.html Trapunta] [http://bigeyelive.com/images/icons/nlinal.html Squalo bianco] [http://uzmilana.com/pages/htmls/dwnmjr.html Boobies] [http://suncom.uz/picture_library/bldpwb.html Edimburgo] [http://jtcmed.com/zaya/ebgvod.html Mamme porche] [http://alpe-fountains.com/images/fhmuuc.html Goal sport live] [http://artfontany.cz/images/icons/dkcdjm.html Finanziamento socio online] [http://artfontany.cz/images/icons/houpjo.html Sito ufficiale ascoli calcio] [http://alpe-fountains.com/images/rrasef.html Racconti erotici 69] [http://uzmilana.com/pages/htmls/ehreuj.html Apertura conto corrente] [http://suncom.uz/picture_library/dnbmmg.html Diddle pimbolo] [http://jesper-holm.dk/GeneratedItems/uqvujt.html Cartina geografica spagna] [http://suncom.uz/picture_library/wburwj.html Annunci sex] [http://jtcmed.com/zaya/eoxlob.html Punto blu telepass] [http://uzmilana.com/pages/htmls/urneib.html Eltron printer] [http://suncom.uz/picture_library/iqbplw.html Gazeta shqiptare] [http://uzmilana.com/pages/htmls/lqovgh.html Video hentai porno] [http://jtcmed.com/zaya/lfmavl.html Vedova vogliosa] [http://suncom.uz/picture_library/gciivc.html Arazzo] [http://suncom.uz/picture_library/gneqbj.html Scatola pizza] [http://marketingstat.com/iq/tbtrah.html Organizzazione evento] [http://artfountains.eu/images/icons/wmufjo.html Europcar com] [http://suncom.uz/picture_library/jqxpav.html Mulatta] [http://jesper-holm.dk/GeneratedItems/rlkbax.html Voli milano budapest] [http://artfontany.cz/images/icons/tibxxa.html Corso aggiornamento aziendale usl modena] [http://bigeyelive.com/images/icons/ufkund.html Download oggplay skin] [http://jesper-holm.dk/GeneratedItems/gbmpdg.html Cofanetto clint eastwood] [http://artfountains.eu/images/icons/kqujmq.html Immagini d amore] [http://suncom.uz/picture_library/kwsucf.html Culinary school] [http://uzmilana.com/pages/htmls/botidw.html Bridgette kerkove] [http://alpe-fountains.com/images/oxrjmp.html Hotel il convento pistoia] [http://uzmilana.com/pages/htmls/lrqeat.html Riviera adriatica] [http://artfontany.cz/images/icons/gsqsoa.html Cheapnet it] [http://uzmilana.com/pages/htmls/alfijs.html Super gnocche] [http://artfontany.cz/images/icons/uwknax.html Troie orientali] [http://alpe-fountains.com/images/upwlci.html Ternana calcio] [http://bigeyelive.com/images/icons/kdecvl.html Porto cervo hotel] [http://infocz.wz.cz/wmxwrf.html Divisione mutuo] [http://marketingstat.com/iq/ledjpu.html Jennifer walcott] [http://uzmilana.com/pages/htmls/isdopp.html Esibizioniste free] [http://artfontany.cz/images/icons/drnfcj.html Palmare windows asus] [http://infocz.wz.cz/qrxmij.html Voli low cost per budapest] [http://artfontany.cz/images/icons/bmdlts.html Modellismo navale roma] [http://uzmilana.com/pages/htmls/magkva.html Canna pescare] [http://marketingstat.com/iq/hflhfx.html Foto esibizionisti] [http://jtcmed.com/zaya/sdruin.html manuela imperato] [http://artfountains.eu/images/icons/rqdkba.html Incesto sorella] ==Creating a landing pad==
+
A '''base''' is used in Orbiter to describe a spaceport to be located on a planet, minor planet, or moon by creating a base configuration file, which is used to describe the name, location, and other need information to describe the base.  
  
Orbiter have several .CFG files in the CONFIG directory. Those files describe the properties of objects.
+
== Base config file ==
 +
The configuration file to describe a base is located in the directory Orbiter\Config\<planet>\Base, for example, when Orbiter launches, it will use Orbiter\Config\Earth\Base\Canaveral.cfg to build the Cape Canaveral spaceport, and will contain certain information to build that base. Information contained in a base configuration file include the name of the base, its location, size, whether the objects described by the file conform to the texture of the planet's surface, any navigation beacons, and a list of objects in the base such as runways, pads, buildings, etc. Orbiter's description for how to build base configuration files is located in Orbiter\docs\OrbiterConfig.pdf.
  
Each planet has a CFG file. For example, for planet Earth there is an Earth.cfg file. In each planet CFG file there is a list of bases, and each base has a CFG file too.
+
So let's build a base and see what it looks like as we build it. For this, select a location for the base. For this, I selected a location on the Bonneville Salt Flats figuring it should be pretty flat to build stuff. Looking up the coordinates of the Flat in Wikipedia, sent a ship there and found what looks like water covering much of the area, so I moved the ship a bit until I found dry land that looked reasonably flat for my base.
  
===Finding a location for your base===
+
One way to visually select a location for your base is to launch Orbiter into any scenario. Once launched, unpause if necessary, press {{Key|Ctrl}}{{Key|F1}} which opens the Orbiter: Camera dialog box. In the '''Target''' tab, select the + in front of the '''Sun''', then select '''Earth''' or whichever planet you choose. Then select the '''Ground''' tab. You will now see a distant image of the Earth, use the mouse wheel to zoom in as necessary, and right-click and move the mouse to navigate to a location, zooming in more as necessary.
  
The first step to create a base is to find out the coordinates of our base.
+
When you find a suitable location and move it to the center of the window, select the '''Current''' button in the '''Ground''' tab, this will update the Position section data. Keep reading here and when you are to type in the longitude and latitude in your base .cfg file, type in or copy and paste the data in that window.
  
Let's open orbiter and load a scenario. Any scenario is good.
+
So, let's open Notepad or your favorite text editor. On the first line type in '''BASE-V2.0'''. This identifies the file to Orbiter that it is a base. Save the file in the directory Orbiter\Config\Earth\Base\ with the filename Bonneville.cfg. Now, Orbiter will build the base. All base configuration files must contain that as the first line.
  
As the mission is loaded, make sure it is not paused. Now press CTRL-F1. Now you see the "orbiter: camera" window.
+
The next line, name the base, in this case '''Name = Bonneville'''. It does not need to be the same name as the filename, for example, in the Canaveral.cfg file, the Name = Cape Canaveral. This way you can use a simple filename for a base with a more complex name.
  
There is a " " in the left of the word "Sun" in that window. Click it. Now click on "Earth" (we are going to place a new base on Earth.
+
The next line contains the location, so type in Location = <longitude> <latitude>, in the case of Bonneville, '''Location = -80.65165 +28.58438'''. The + for positive coordinates is likely not required, but, it may be best to include it to make it less confusing to the reader. This will be the center of the base, and where the yellow square appears when flying nearby the base.
  
Now push the "apply" button. Use your mouse wheel to zoom in/out. Press right click and move your mouse until the place where you want your base is right in the center of the screen. You may want to zoom in once you have located the location.
+
The next line is the size of the base. '''Size = 1000''' for example. This defines the radius of the base in meters. It seems to be arbitrary as there are objects listed in some bases that came with the stock Orbiter 2016 with buildings and other objects that are located inside and outside of this radius.
  
Now press the "Ground button" and then the "Current" button. As you see, 3 numbers wil appear in one field in that window. We need to copy and paste the first 2 numbers.
+
The next line is '''OBJECTSIZE = 100''' which defines the size, in meters, of a typical object on the base. This allows Orbiter to determine the distance that base objects will be rendered on the screen during runtime. Default is 100, objects whose rendered size is less than one pixel will not be rendered until it's visual size exceeds one pixel.
  
So select the first 2 numbers and copy them to the clipboard. Now we have the latitude and longitude of the base.
+
The next line contains '''MAPOBJECTSTOSPHERE = TRUE''' or '''MAPOBJECTSTOSPHERE = FALSE'''. If this parameter is TRUE, the objects listed for this base will be mapped to the surface of the planet, if it is FALSE, objects will be placed on a flat plane from the elevation of the center of the base.
  
===Adding a base to the planet===
+
The remainder of the file contains the NAV list, objects such as runways, pads, buildings, etc. and Surface tile list.
  
Now close the Orbiter camera window. Now press CTRL-Q to exit Orbiter.
+
So, here, save your file and launch Orbiter with any scenario. In any scenario, Orbiter will read this file along with all the others and build the base in accordance with your information for this base. If you fly nearby, you should see a yellow marker with the name of the base. Each time you edit the file, you need to exit Orbiter back to the launch pad and relaunch the scenario to see any changes. You can exit, make changes saving them, then relaunch. Or you can edit while the scenario is running, save, exit, and re-launch since Orbiter reads the file only during startup.
  
Open Notepad.
+
== Navbeacon ==
Open the Orbiter directory, and then open the Config directory.
+
Navbeacons are navigation beacons located in various locations about the planet, particularly Earth, which are addressable by your receiver stack, and used by various MFD modes for navigation purposes. VOR transmitters not associated with bases are listed in the planet's config file, e.g. Earth.cfg.
Drag the Earth.cfg file to the Notepad window.
 
  
Scroll down until you find
+
VOR transmitters associated with bases are listed in each base's config file. So, lets add one for Bonneville. In the file Bonneville.cfg, type in the lines '''BEGIN_NAVBEACON''' and '''END_NAVBEACON''' with a space between them. In that space, type in '''VOR KBSF -114.05 4061 112.7 500'''.
  
; === Surface Bases ===
+
Since VOR is the only beacon format used by Orbiter, '''VOR''' must be the first part of the line.
 
BEGIN_SURFACE
 
  
As you see, there is a list of bases right after that.
+
The next parameter is the name of the VOR. '''KBSF''' was chosen as a moniker for 'Bonneville Salt Flats' so it is unique, it's not used in Earth.cfg VOR list and not used in any base configuration files.  
Each base has a CFG file.
 
  
Let's guess we want to create a base called "Rincon de la Vieja" and let's guess your coordinates are -84.989845  10.739155, and the base properties will be placed in a file called Rincon.cfg.
+
The next parameter is the longitude location of the transmitter in decimal degrees, east is positive (+), west is negative (-). KBSF is '''-114.05'''.
  
Between BEGIN_SURFACE and END_SURFACE add a line that reads:
+
Next is the latitude location of the transmitter in decimal degrees, north is positive (+), south is negative (-). KBSF is '''+40.61'''.
  
Rincon: -84.989845  10.739155
+
The next parameter is the frequency of the VOR transmitter in MHz, valid frequencies are 85 to 140 MHz. KBSF is '''112.7'''. It is advisable to check other base config files and the VOR list in the planet's config file to make sure there are not other transmitters using the same frequency that may overlap in any location. The ship's receiver receiving two transmitters' signal at the same time may confuse the receiver and direct you to the incorrect transmitter.
  
Notice that instead of those numbers I used, you should paste the numbers that you just had in your clipboard.
+
The last parameter is the distance in kilometers from the transmitter which the ship's receiver can detect a signal, default is 500. KBSF is '''500'''.
  
Save and exit Notepad.
+
Then the last line should be '''END_NAVBEACON''' which you typed in earlier.
Now you have added your base to the planet.
 
  
===Creating the landing pad===
+
== Object List ==
 +
The next section is the object list which builds objects such as buildings, landing pads, runways, and so forth. So, for the next section type in '''BEGIN_OBJECTLIST''' and '''END_OBJECTLIST''' on two separate lines with a space between. All objects will be entered between these two lines.
 +
There are separate articles for each of the objects listed below.
  
Now open Notepad.
+
Valid objects are:
Copy the following text and paste in Notepad.
+
*[[Block|BLOCK]] - an object with four sides and a flat roof used for buildings with a flat roof such as offices, stores, etc.
 +
*[[HANGAR]] - a building with a barrel-shaped or curved roof and four sides.
 +
*[[HANGAR2]] - a building with a peaked roof and four sides like a house.
 +
*[[HANGAR3]] - a building with a barrel-shaped or curved roof reaching to the ground and only two sides at the ends.
 +
*[[TANK]] - an object that is circular with a flat top, used for, obviously, tanks, and other stuff.
 +
*[[RUNWAY]] - used for a runway. Obviously a runway can only be used on planets with a substantial atmosphere.
 +
*[[RUNWAY LIGHTS]] - used to create lights for a runway. includes the PAPI and VASI.
 +
*[[BEACONARRAY]] - an array of lights in a straight line. Used for night lighting for a taxiway.
 +
*[[SOLARPLANT]] - a grid of solar panels mounted on the ground. The panels can align themselves with the Sun for best efficiency.
 +
*[[TRAIN1]] - a train configured as a monorail on a straight track.
 +
*[[TRAIN2]] - a train configured as a suspension train on a straight track. Note that TRAIN1 and TRAIN2 worked in Orbiter versions up until O2010, but no longer work in O2016.
 +
*[[LPAD1]] - an octagonal landing pad.
 +
*[[LPAD2]] - a square landing pad.
 +
*[[LPAD2a]] - another square landing pad with a different layout for the texture map.
 +
*[[MESH]] - a generic mesh used for custom objects, must be in Orbiter mesh file formats.
  
; === Surface Base ===
+
 
+
Each object is defined by several parameters which describes characteristics of that object, including some that have a default value unless you specify values within the object. The object's texture, or what it looks like will be described by one or more lines. For a texture to be used, there must be a file with the extension '''.dds''' in the Orbiter\Textures directory and it must be listed in the file Orbiter\Config\Base.cfg file. Note that if you browse the Textures directory you may find texture files that can be used as object textures but not listed in the Base.cfg file.
Name = Rincon de la vieja
+
 
Size = 2000
+
If you want to see that the texture looks like, you would need a texture viewer. Any textures you would like to use in objects, such as Cape17.dds, just open Base.cfg and type in the filename without the extension into the list in any order and save it.
ObjectSize = 2000
+
 
+
To get us started, let's build a landing pad.
BEGIN_OBJECTLIST
+
 
  LPAD2
+
== Landing Pad ==
  POS 0 0
+
So, in the Bonneville.cfg file, between the BEGIN_OBJECTLIST and END_OBJECTLIST lines type in the following.
  SCALE 5 0.15 0
+
 
  TEX Lpad02
+
  LPAD1
  NAV 128.05
+
  POS 0 0 0
 +
  SCALE 0.75
 +
ROT 0
 +
  TEX Lpad01
 +
  NAV 128.00
 
  END
 
  END
END_OBJECTLIST
+
Save your work, and launch a scenario, any scenario. Orbiter reads the file during launch, but, no time else during the session. So, your updated .cfg file will appear in any scenario if your ship is nearby. Your new landing pad should look like the images on the right:
 +
 
 +
 
 +
[[File:LPad01_Day.png|center|thumb|<center>Landing Pad LPad01 during daytime</center>]] [[File:LPad01_Night.png|center|thumb|<center>Landing Pad LPad01 during nighttime</center>]]
 +
 
 +
== Config file ==
 +
So, your Bonneville.cfg file should look something like this:
  
Now save this as <code>Rincon.cfg</code> in the CONFIG directory, and then exit Notepad.
+
BASE-V2.0
 +
Name = Bonneville
  
Congratulations!! You have created a base with a landing pad.
+
Location = -114.05 40.61
 +
Size = 2000
 +
OBJECTSIZE = 100
 +
MAPOBJECTSTOSPHERE = TRUE
  
===Viewing your base===
+
BEGIN_NAVBEACON
 +
VOR KBSF -114.05 40.61 112.7 500
 +
END_NAVBEACON
  
You now can open orbiter and load a scenario.
+
BEGIN_OBSERVER
If you press CTRL-F1 and you click on the " " that is next to "Spaceports".
+
Bonneville:Bonneville0:-114.05 40.61 25
 +
END_OBSERVER
  
Scroll down until you find your base.
+
BEGIN_OBJECTLIST
Click on the name of your base and press the "Apply" button.
+
LPAD1
 +
POS 0 0 0
 +
SCALE 0.75
 +
ROT 0
 +
TEX Lpad01
 +
NAV 128.00
 +
END
 +
END_OBJECTLIST
  
Press the "Track" button and then press the "Movable target relative" button.
+
Save it, launch any scenario and take a look-see. You now have a base with a landing pad. You may need to move a ship to the LPad.
  
You should see your base now.
+
See separate articles to build other base objects.
  
 
===External links===
 
===External links===
 
*[http://orbit.m6.net/v2/read.asp?id=25089 Orbiter Forum Discussion]
 
*[http://orbit.m6.net/v2/read.asp?id=25089 Orbiter Forum Discussion]
  
[[Category:Tutorials]][[Category:Addon tutorials]]
+
[[Category: Articles]]
 +
[[Category:Tutorials]]
 +
[[Category:Add-on tutorials]]

Latest revision as of 12:39, 27 November 2023

A base is used in Orbiter to describe a spaceport to be located on a planet, minor planet, or moon by creating a base configuration file, which is used to describe the name, location, and other need information to describe the base.

Base config file[edit]

The configuration file to describe a base is located in the directory Orbiter\Config\<planet>\Base, for example, when Orbiter launches, it will use Orbiter\Config\Earth\Base\Canaveral.cfg to build the Cape Canaveral spaceport, and will contain certain information to build that base. Information contained in a base configuration file include the name of the base, its location, size, whether the objects described by the file conform to the texture of the planet's surface, any navigation beacons, and a list of objects in the base such as runways, pads, buildings, etc. Orbiter's description for how to build base configuration files is located in Orbiter\docs\OrbiterConfig.pdf.

So let's build a base and see what it looks like as we build it. For this, select a location for the base. For this, I selected a location on the Bonneville Salt Flats figuring it should be pretty flat to build stuff. Looking up the coordinates of the Flat in Wikipedia, sent a ship there and found what looks like water covering much of the area, so I moved the ship a bit until I found dry land that looked reasonably flat for my base.

One way to visually select a location for your base is to launch Orbiter into any scenario. Once launched, unpause if necessary, press CtrlF1 which opens the Orbiter: Camera dialog box. In the Target tab, select the + in front of the Sun, then select Earth or whichever planet you choose. Then select the Ground tab. You will now see a distant image of the Earth, use the mouse wheel to zoom in as necessary, and right-click and move the mouse to navigate to a location, zooming in more as necessary.

When you find a suitable location and move it to the center of the window, select the Current button in the Ground tab, this will update the Position section data. Keep reading here and when you are to type in the longitude and latitude in your base .cfg file, type in or copy and paste the data in that window.

So, let's open Notepad or your favorite text editor. On the first line type in BASE-V2.0. This identifies the file to Orbiter that it is a base. Save the file in the directory Orbiter\Config\Earth\Base\ with the filename Bonneville.cfg. Now, Orbiter will build the base. All base configuration files must contain that as the first line.

The next line, name the base, in this case Name = Bonneville. It does not need to be the same name as the filename, for example, in the Canaveral.cfg file, the Name = Cape Canaveral. This way you can use a simple filename for a base with a more complex name.

The next line contains the location, so type in Location = <longitude> <latitude>, in the case of Bonneville, Location = -80.65165 +28.58438. The + for positive coordinates is likely not required, but, it may be best to include it to make it less confusing to the reader. This will be the center of the base, and where the yellow square appears when flying nearby the base.

The next line is the size of the base. Size = 1000 for example. This defines the radius of the base in meters. It seems to be arbitrary as there are objects listed in some bases that came with the stock Orbiter 2016 with buildings and other objects that are located inside and outside of this radius.

The next line is OBJECTSIZE = 100 which defines the size, in meters, of a typical object on the base. This allows Orbiter to determine the distance that base objects will be rendered on the screen during runtime. Default is 100, objects whose rendered size is less than one pixel will not be rendered until it's visual size exceeds one pixel.

The next line contains MAPOBJECTSTOSPHERE = TRUE or MAPOBJECTSTOSPHERE = FALSE. If this parameter is TRUE, the objects listed for this base will be mapped to the surface of the planet, if it is FALSE, objects will be placed on a flat plane from the elevation of the center of the base.

The remainder of the file contains the NAV list, objects such as runways, pads, buildings, etc. and Surface tile list.

So, here, save your file and launch Orbiter with any scenario. In any scenario, Orbiter will read this file along with all the others and build the base in accordance with your information for this base. If you fly nearby, you should see a yellow marker with the name of the base. Each time you edit the file, you need to exit Orbiter back to the launch pad and relaunch the scenario to see any changes. You can exit, make changes saving them, then relaunch. Or you can edit while the scenario is running, save, exit, and re-launch since Orbiter reads the file only during startup.

Navbeacon[edit]

Navbeacons are navigation beacons located in various locations about the planet, particularly Earth, which are addressable by your receiver stack, and used by various MFD modes for navigation purposes. VOR transmitters not associated with bases are listed in the planet's config file, e.g. Earth.cfg.

VOR transmitters associated with bases are listed in each base's config file. So, lets add one for Bonneville. In the file Bonneville.cfg, type in the lines BEGIN_NAVBEACON and END_NAVBEACON with a space between them. In that space, type in VOR KBSF -114.05 4061 112.7 500.

Since VOR is the only beacon format used by Orbiter, VOR must be the first part of the line.

The next parameter is the name of the VOR. KBSF was chosen as a moniker for 'Bonneville Salt Flats' so it is unique, it's not used in Earth.cfg VOR list and not used in any base configuration files.

The next parameter is the longitude location of the transmitter in decimal degrees, east is positive (+), west is negative (-). KBSF is -114.05.

Next is the latitude location of the transmitter in decimal degrees, north is positive (+), south is negative (-). KBSF is +40.61.

The next parameter is the frequency of the VOR transmitter in MHz, valid frequencies are 85 to 140 MHz. KBSF is 112.7. It is advisable to check other base config files and the VOR list in the planet's config file to make sure there are not other transmitters using the same frequency that may overlap in any location. The ship's receiver receiving two transmitters' signal at the same time may confuse the receiver and direct you to the incorrect transmitter.

The last parameter is the distance in kilometers from the transmitter which the ship's receiver can detect a signal, default is 500. KBSF is 500.

Then the last line should be END_NAVBEACON which you typed in earlier.

Object List[edit]

The next section is the object list which builds objects such as buildings, landing pads, runways, and so forth. So, for the next section type in BEGIN_OBJECTLIST and END_OBJECTLIST on two separate lines with a space between. All objects will be entered between these two lines. There are separate articles for each of the objects listed below.

Valid objects are:

  • BLOCK - an object with four sides and a flat roof used for buildings with a flat roof such as offices, stores, etc.
  • HANGAR - a building with a barrel-shaped or curved roof and four sides.
  • HANGAR2 - a building with a peaked roof and four sides like a house.
  • HANGAR3 - a building with a barrel-shaped or curved roof reaching to the ground and only two sides at the ends.
  • TANK - an object that is circular with a flat top, used for, obviously, tanks, and other stuff.
  • RUNWAY - used for a runway. Obviously a runway can only be used on planets with a substantial atmosphere.
  • RUNWAY LIGHTS - used to create lights for a runway. includes the PAPI and VASI.
  • BEACONARRAY - an array of lights in a straight line. Used for night lighting for a taxiway.
  • SOLARPLANT - a grid of solar panels mounted on the ground. The panels can align themselves with the Sun for best efficiency.
  • TRAIN1 - a train configured as a monorail on a straight track.
  • TRAIN2 - a train configured as a suspension train on a straight track. Note that TRAIN1 and TRAIN2 worked in Orbiter versions up until O2010, but no longer work in O2016.
  • LPAD1 - an octagonal landing pad.
  • LPAD2 - a square landing pad.
  • LPAD2a - another square landing pad with a different layout for the texture map.
  • MESH - a generic mesh used for custom objects, must be in Orbiter mesh file formats.


Each object is defined by several parameters which describes characteristics of that object, including some that have a default value unless you specify values within the object. The object's texture, or what it looks like will be described by one or more lines. For a texture to be used, there must be a file with the extension .dds in the Orbiter\Textures directory and it must be listed in the file Orbiter\Config\Base.cfg file. Note that if you browse the Textures directory you may find texture files that can be used as object textures but not listed in the Base.cfg file.

If you want to see that the texture looks like, you would need a texture viewer. Any textures you would like to use in objects, such as Cape17.dds, just open Base.cfg and type in the filename without the extension into the list in any order and save it.

To get us started, let's build a landing pad.

Landing Pad[edit]

So, in the Bonneville.cfg file, between the BEGIN_OBJECTLIST and END_OBJECTLIST lines type in the following.

LPAD1
POS 0 0 0
SCALE 0.75	
ROT 0
TEX Lpad01
NAV 128.00
END

Save your work, and launch a scenario, any scenario. Orbiter reads the file during launch, but, no time else during the session. So, your updated .cfg file will appear in any scenario if your ship is nearby. Your new landing pad should look like the images on the right:


Landing Pad LPad01 during daytime
Landing Pad LPad01 during nighttime

Config file[edit]

So, your Bonneville.cfg file should look something like this:

BASE-V2.0
Name = Bonneville
Location = -114.05 40.61
Size = 2000
OBJECTSIZE = 100
MAPOBJECTSTOSPHERE = TRUE
BEGIN_NAVBEACON
VOR KBSF -114.05 40.61 112.7 500
END_NAVBEACON
BEGIN_OBSERVER
Bonneville:Bonneville0:-114.05 40.61 25
END_OBSERVER
BEGIN_OBJECTLIST
LPAD1
POS 0 0 0
SCALE 0.75	
ROT 0
TEX Lpad01
NAV 128.00
END
END_OBJECTLIST

Save it, launch any scenario and take a look-see. You now have a base with a landing pad. You may need to move a ship to the LPad.

See separate articles to build other base objects.

External links[edit]