Difference between revisions of "Lunar Reconnaissance Orbiter (BrianJ add-on)"

From OrbiterWiki
Jump to navigation Jump to search
Line 144: Line 144:
 
  In the left MFD, Click '''MOD''', and ''Offset Disabled'' should be highlighted.  
 
  In the left MFD, Click '''MOD''', and ''Offset Disabled'' should be highlighted.  
 
  Click '''+''' twice and ''Vel. Frame'' should be displayed. Click '''Nxt''' until ''Lon'' is highlighted.  
 
  Click '''+''' twice and ''Vel. Frame'' should be displayed. Click '''Nxt''' until ''Lon'' is highlighted.  
  Click '''Set''' and enter '''80.8'''. Click '''Nxt''' and ''Lat'' should be highlighted.  
+
  Click '''Set''' and enter '''86.7'''. Click '''Nxt''' and ''Lat'' should be highlighted.  
  Click '''Set''' and enter '''34.0'''. Click '''Nxt''', then '''Set''', and enter '''9.548M''' for ''Rad''.  
+
  Click '''Set''' and enter '''27.6'''. Click '''Nxt''', then '''Set''', and enter '''12.79M''' for ''Rad''.  
 
  Adjust the ''Rad'' and ''Lat'' parameters to get the ''PeA'' and ''Rin'' parameters in the right MFD as close
 
  Adjust the ''Rad'' and ''Lat'' parameters to get the ''PeA'' and ''Rin'' parameters in the right MFD as close
 
  as possible to ''216k'' and ''90'' degrees. Repeat as necessary. Click '''Pg''', then '''BV''', then '''AB'''.
 
  as possible to ''216k'' and ''90'' degrees. Repeat as necessary. Click '''Pg''', then '''BV''', then '''AB'''.

Revision as of 03:37, 29 October 2008

Overview

The Lunar Reconnaissance Orbiter (LRO) is the first mission in NASA's planned return to the moon. LRO will launch 2nd March, 2009, with the objectives to finding safe landing sites, locate potential resources, characterize the radiation environment and test new technology.

The return to the moon will enable the pursuit of scientific activities that address our fundamental questions about the history of Earth, the solar system and the universe -- and about our place in them. It will allow us to test technologies, systems, flight operation and exploration techniques to reduce the risk and increase the productivity of future missions to Mars and beyond. It will also expand Earth's economic sphere to conduct lunar activities with benefits to life on our home planet.

LRO is an unmanned mission to create the comprehensive atlas of the moon's features and resources necessary to design and build a lunar outpost. LRO focuses on the selection of safe landing sites, identification of lunar resources and the study of how lunar radiation will affect humans.

After launch, the LCROSS shepherding spacecraft and the Atlas V’s Centaur upper stage rocket will execute a fly-by of the moon and enter into an elongated Earth orbit to position LCROSS for impact on a lunar pole. On final approach, the shepherding spacecraft and Centaur will separate. The Centaur will act as a heavy impactor to create a debris plume that will rise above the lunar surface. Following four minutes behind, the shepherding spacecraft will fly through the debris plume, collecting and relaying data back to Earth before impacting the lunar surface and creating a second debris plume.

The debris plumes are expected to be visible from Earth- and space-based telescopes 10-to-12 inches and larger.

This is a difficult and challenging mission. Experienced orbinauts will enjoy the challenge of targeting the LCROSS to impact the North Pole of the moon, when the LRO spacecraft is overhead. This mission is not recommended for people recently starting to use Orbiter. Familiarity with setting up gravity assist maneuvers in TransX is a required skill.

Mission Objectives

LRO

The objective of the LRO mission is to map the lunar surface in preparation for the return of human missions to the moon, which are planned to occur by 2020.

LCROSS

Earth’s closest neighbor is holding a secret. In 1999, hints of that secret were revealed in the form of concentrated hydrogen signatures detected in permanently shadowed craters at the lunar poles by NASA’s Lunar Prospector. These readings may be an indication of lunar water and could have far-reaching implications as humans expand exploration past low-Earth orbit. The Lunar CRater Observing and Sensing Satellite (LCROSS) mission is seeking a definitive answer.

required add-ons

optional add-ons

Spacecraft Specifications

LRO

  • Empty Mass 809kg
  • Fuel Mass 897kg, ISP 2100Ns/kg
  • Main Engine 352N
  • RCS 20N


LCROSS

  • Empty Mass 592kg
  • Fuel Mass 300kg, ISP 2200Ns/kg
  • Retro Engine 44N
  • RCS 4.5N


AV020Centaur

  • Empty Mass 1914kg
  • Fuel Mass 20672kg, ISP 3590Ns/kg
  • Main Engine 99400N
  • RCS 1000N

NOTE: When AV020Centaur fuel is finished, control is automatically switched to LCROSS propulsion system.

Spacecraft Controls

Available commands are displayed on the top-left of the vessel HUD

AV020Centaur

P = Toggle Parking Orbit Autopilot On/Off
J = Jettison LRO
B = Manual Purge Centaur Fuel (automatic at 32000km alt.)
K = Jettison LCROSS
V = Deploy/Delete LCROSS "Bullseye" target on Moon N.Pole
N = Display LRO Lunar Orbit Data
M = TransX cheat! Enable 44N "ghost" Main Engine for use with TransX


LRO

G = Deploy Antenna (automatic Earth tracking)
K = Deploy Solar Panel (automatic Sun tracking)
N = Activate Laser Altimeter
V / ShiftV = Rotate DLRE Azimuth
B / ShiftB = Rotate DLRE Elevation


LCROSS

F8 = View from Visual Context Imager (6 deg FOV)

Procedures

Accuracy of burns in this mission is CRITICAL. During this mission, especially after the TLI burn, we will be using the tools TransX or IMFD to get the DIRECTION of our burns, and using IMFD map to monitor in real time the MAGNITUDE of the DeltaV we are imparting. For this mission, usually the AUTOBURN button is NOT your friend.

The precession of the Moon's axis is not modelled in Orbiter. To ensure accuracy of the Moon's orientation at the time of the mission, the LRO add-on uses a custom sol.cfg and moon.cfg located in the Config/LRO/ directory. To use them, the "Environment" entry in the scenario file must point to the LRO/sol.cfg. e.g.

BEGIN_ENVIRONMENT
 System LRO/Sol
 Date MJD 54892.2256944444
END_ENVIRONMENT

Launch

Fire up the 01 - AV020 LRO launch scenario in the LRO scenarios folder This is a night launch so visibility is poor until after the TLI burn. The scenario starts at UTC 03/02/2009 05:25:00. Launch time is UTC 05:26:27. The default camera view is Ground Observer. You have just over a minute to set up the camera to your personal preference.

At UTC 05:26:17 press the p key to start the launch countdown and 
1st stage auto-pilot.

At T-5 seconds, engine ignition will happen, and the hold down clamps release at T-0. The Atlas V-401 1st stage autopilot will continue until 1st stage seperation.It can be disengaged by Pressing p again, but this is not recommended.

10 seconds after 1st stage separation, press the p key again.

This will ignite the 2nd stage Centaur engine, and engage the 2nd stage autopilot which will put the vehicle in a circular 185km parking orbit. Pressing p again will disengage the 2nd stage autopilot.

Shortly after 2nd stage ignition, the fairing will be automatically jettisoned, and the LRO/LCROSS spacecraft will be exposed.

TLI

After SECO, while established in the 185km parking orbit, set the Left MFD to IMFD.

Also, click the HUD button in the right orbit MFD so that your HUD is set to orbit reference Earth
Click the Prograde button to engage the prograde autopilot. 

IMFD Configuration set-up

Click MNU, then Configuration. 
Click Nxt, then + to change the Mission timer to MJD mode. 
Click Nxt ten times to hightlight Parking Orbit Alt. 
Click Set, and set this to 185k

Establishing the TLI burn

Click MNU, then Course.
Target Intercept should be highlighted. If not, click Nxt until it is.
Click Set
Click Tgt and enter Moon
Click Nxt 5 times so that Realtime is highlighted. 
Click + to change it to Off-Axis.
Click Nxt until the Tej parameter is highlighbted.
Click + or - repeately until the dV parameter reaches a minimum. This should be about 3.3k

Select IMFD in the right MFD also.

Click MNU, then PG. Enter 0 for the MFD ID. Click Map.
Click Tgt, and enter Moon. Click PG, then Plan.
Clidk PG, then click Sel until Ref Moon appears in yellow text.
Click MOD 3 times, then click Nxt so that Accuracy is highlighted. 
Click - twice so that accuracy is set to Max.
Click MOD to return to the map display.

Wait until the TEj parameter in the left display is 1k

In the left MFD, Click MOD, and Offset Disabled should be highlighted. 
Click + twice and Vel. Frame should be displayed. Click Nxt until Lon is highlighted. 
Click Set and enter 86.7. Click Nxt and Lat should be highlighted. 
Click Set and enter 27.6. Click Nxt, then Set, and enter 12.79M for Rad. 
Adjust the Rad and Lat parameters to get the PeA and Rin parameters in the right MFD as close
as possible to 216k and 90 degrees. Repeat as necessary. Click Pg, then BV, then AB.
Disengage the Prograde autopilot.
IMFD setup for the TLI burn
IMFD setup for the TLI burn
















Sit back and wait for the burn. You may wish to use time acceleration to get close to the burn time, but set it back to 1x acceleration once you get close.

When the TLI burn is complete, click on the BV button to restore 
the main IMFD Course target intercept screen. Click MOD, then Prv
until Vel. Frame is highlighted. Click + so that Offset Disabled is shown.
Click MOD three times to return to the main target intercep screen.
Also, in the right MFD, click Pg, then Plan to disengage plan mode.
Press the j key to jettison LRO.
Switch focus back to LRO.
Press the k key to deploy the LRO solar panels
Once the panels have fully unfolded, and rotated to face the sun,
press the g key to deploy the antenna

Lunar targeting/LCROSS

  • Swingby of moon is passive (no thrusting)
  • 81 days in post-swingby cruise orbit
  • Current baseline is 3-month trajectory with south pole impact
  • Two revolutions in high ecliptic inclination (~50 deg), 40-day period Earth orbit

When you reach 32M altitude above the Earth, the Centaur engine will automatically purge of all fuel and control switches over to the LCROSS propulsion system. You may initate the engine purge manually by pressing B. It is critical that you get your targeting done for LCROSS before this time, as once that happens, your deltaV budget is severely limited.

Switch focus to AV020Centaur. Select Orbit MFD in the right MFD. At about 21M altitude above the earth, select IMFD in the Right MFD.

Click MNU, then Map. Make sure Target is Moon, and Ref moon is displayed.
Click MOD three times, and set Accuracy to Max.
Click MOD again to return to the map display.
Use rotational thrusters to point the Centaur in a northward direction. (Towards Polaris)
Switch to translation mode and use linear thrusters until PeA in the Right MFD is about 2M.
In the left MFD be sure Target Intercept is highlighted. 
Click +, then Nxt four times until Delta Velocity is highlighted. 
Click Set. Click TGT, and type Moon.
Click Nxt four times until dVf is highlighted. 
Click Set, and enter 0.
in the Right MFD, click Plan so the green course line turns blue.
In the left MFD, adjust dVp and dVf so that RIn and PeA in the right MFD
are as close as possible to 90 degrees, and 2.0M, respectively.
Click PG, BV, and AB.
When the burn is finished, click BV, and PG in the left MFD, and Plan in the right MFD.

Select Transx in both MFDs. Select moon as the target in the right MFD

Click the FWD button for stage 2, make sure the view is Setup and select the target as Escape.
Click the FWD button again for stage 3, and select the target as Moon
Click the VW button for Sling Direct view.
On the Left MFD, click the FWD button for stage 2, if not already there. 
Click the VW button for slingshot view, if not already there.

There will be a green line extending from the center of the moon to hopefully past the edge. This is an edge-on view of our current approach to the moon. We need to fine tune this approach to give us a lunar gravity assist which will result in a highly inclined orbit around the earth with a period of 40 days

On the Right MFD, click the VAR button twice to bring up the Inc. angle parameter
Click on ++ several times until the dotted yellow orbit is about the same size as the solid green line. 
It does not have to be superimposed in the same place, but of a similar diameter.

On the Left MFD the dotted yellow line should be on the same side (more or less) of the moon as the green line. If it is on the opposite side, click on the -- button until it is on the same side.

On the Right MFD, click on VAR four times until the outward angle parameter is shown.
Adjust this parameter, and the Inc. angle parameter until the dotted line is superimposed 
on the solid green line in the slingshot view.

This is our current trajectory. Now we need to adjust the trajectory to impact the moon in 2 orbits with a 40 day period.

On the Right MFD, click VW so that the setup view is shown
Click VAR 3 times so that Orbits to Icept is shown
Click ++ 4 times so that the Orbits to Icept parameter is 2.0

Now we must figure out what our Enc. MJD should be. Take the current MJD and add 85 to it. (5 days to reach the moon, then 2 orbits of 40 days each.) For the Mar 2 (UTC) launch this would be 54892 + 85 = 54977. This is the Enc. MJD we will be shooting for.

Click VW again in the right MFD to get back to sling direct view.
Adjust the Inc Angle to get as close as possible to the desired MJD.
Click VAR so that Outward angle is displayed. 
Click ADJ twice so that the increment is Fine 
Adjust Outward angle to get the Cl. App. as close as possible. 

My current solution is Inc Angle of 114.44 degrees and Outward angle of -43.172. Enc MJD is 54979.28, and Cl. App is 6.352M
Your Mileage may vary.

Once a solution has been reached, click BCK twice on the Right MFD. 
The View should be Maneuver and Maneuver mode should
be off. Click ++ to turn Maneuver mode on
Adjust Prograde Vel. and Ch. Plane vel. until the dotted yellow line on the Left MFD 
lines up with the solid green line. 
R. Inc should be as close as possible to 0, and Pe Ratio should be as close as possible to 1.000.
Once this is done, click VW in the right MFD to get to target view.
Use rotational thrusters to get the cross in the middle of the target and burn until 
Rel.V is as close to 0 as possible.
Click VW twice to get to maneuver view, Click VAR to get to Maneuver mode and turn it off.
Look at the Left MFD to see how you did. Additional corrections may be done as you get 
closer to the moon.

LRO_part_2