Difference between revisions of "File:ToddWessShuttleDiagram3.gif"

From OrbiterWiki
Jump to navigation Jump to search
(This figure shows the dimensions for cutting out the forward panel. Here it is shown in two pieces so it can fit on the 48x48 piece of material. Once cut out, they were joined in the back by three 3-foot pieces of wood.)
(No difference)

Revision as of 20:20, 9 November 2008

This figure shows the dimensions for cutting out the forward panel. Here it is shown in two pieces so it can fit on the 48x48 piece of material. Once cut out, they were joined in the back by three 3-foot pieces of wood.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:20, 9 November 2008Thumbnail for version as of 20:20, 9 November 20081,949 × 1,837 (41 KB)Yagni01 (talk | contribs)This figure shows the dimensions for cutting out the forward panel. Here it is shown in two pieces so it can fit on the 48x48 piece of material. Once cut out, they were joined in the back by three 3-foot pieces of wood.

The following page uses this file: