Black Dart

From OrbiterWiki
Revision as of 12:45, 17 October 2009 by Urwumpe (talk | contribs)
Jump to navigation Jump to search
Pilot's DTU

The X-41 Black Dart is a futuristic military spaceplane. It is currently under development.

Features

  • Main engine can gimbal from +5° to -90°, allowing hover flight in combination with a thruster in the nose.
  • Nozzle extension deploys depending on thrust level (~chamber pressure) and ambient pressure, optimizing ISP.
  • Nozzle performance depends on ambient and chamber pressure.
  • Ladder deploys automatically when landing gear down and Ventral Bay Doors open.

Main Engine

Main engine TVC trim angle can only pass past -5°, when Main engine doors are opened. Main engine doors can only close when TVC trim angle is between +5° and -5°.

The nozzle extension position has three modes, RET, AUTO and DPY. RET keeps the nozzle in the retracted position, DPY keeps the nozzle extended.



Warning! Vertical landing with deployed nozzle extension can result in nozzle damage.


When in AUTO mode, the nozzle extension logic selects nozzle extension position for optimal ISP at current thrust level and ambient pressure. The automatic mode also retracts the nozzle when flying below 20m altitude.

Specifications (X-41A)

Empty mass 12,000 kg
Main propellant mass 10,000 kg
RCS/OMS propellant mass 6,000 kg
MTOW 32,000 kg
Main Engine Thrust (vac) 680
Main Engine ISP (vac) 61000


Keyboard layout

1 Enable Low Thrust Mode of the main engine
2 Enable High Thrust Mode of the main engine
3 Toggle between OMS and main engine as main thrust group
4 Deploy/stow REO console
5 Deploy antenna
6 Open/close Inner Hatch
CTRL + 6 Open/close Outer Hatch
7 Open/Close main engine and hover doors.
8 Cycle through main engine nozzle extension modes (Retract, Automatic, Deploy)
9 Open/close canopy
0 Open/close fuel and oxidizer umbilical access doors
CTRL+0 Extend/Retract under-wing pylons.
E Begin EVA, using the last astronaut which entered the spacecraft.
G Deploy/retract landing gear
K Open/close dorsal bay doors
CTRL + K Open/close ventral bay doors
ALT + 1 Power on/off MILGPC 1
ALT + 2 Power on/off MILGPC 2
ALT + 3 Power on/off MILGPC 3
ALT + 4 Power on/off MILGPC 4
ALT + 5 Power on/off Pilot DTU
Space Release payload.